An 8-Step Guide For Water Damage Restoration And Cleanup

Unforeseen events such as flooding and the like may result in different home damages of varying severity. They may range from damaged pipes to water soaking into floorings and other wall fixtures. Regardless of the reason behind the damage, a waterlogged home requires immediate attention by licensed professionals who can carry out water damage restoration, cleanups, and repairs to ensure that the damages are put under control and are dealt with properly.

The water damage restoration process ensures that a property that has accidentally sustained water damage from flooding or plumbing problems will revert back to its former state. It’s also very important to promote a safe space for the home occupants.

Trained and experienced professionals are said to carefully observe safety measures during the whole remediation and cleanup ordeal. If you want to learn more about water damage restoration services in Portland, Oregon, checking out sites such as https://www.summitclean.com/water-damage-restoration-portland-oregon and others over the web will help.

Effects Of Water Damage To Your Home

When flooding in your home occurs, whether due to natural calamities or an indoor plumbing problem out of your control, it brings with it undesirable effects to your family and property. Some of them are listed down below.

• Structural damage

One of the detrimental effects of water damage is the deterioration of your home’s overall structure.

When water lingers after a flood or plumbing issue, it can soak into almost any material such as the drywall, floorboards, joists, wall studs, and rafters that support your home. As the water seeps into them, they’ll steadily weaken over time. The drywall is usually the first to degrade, usually after only half an hour of exposure to water.

Your house’s wall studs and hardwood will likely swell up and warp while the floorboards will separate. Also, some nails may appear to be pushed out of their place.

• Health risks

When water is left to stay stagnant in your home, it poses a possible risk for mold formation that can be a serious health concern for your family. Aside from the dangers mold can bring, dirty sewage water, which is the home to many harmful microorganisms and parasites, carries the highest risk to an individual’s health.

• Costly repairs

Depending on the severity of the water damage present in your home, it can be an expensive ordeal that may blow a hole out of your pockets. In extreme cases of water damage, extensive water remediation services and clean-up to ensure that your home is back to its former self are required. These are potentially costly and may take a huge chunk off of your savings.

A Close Look At The Water Damage Restoration And Cleanup Process

If you’re wondering what takes place during the water damage restoration and cleanup process, here is an overview of the procedure.

    1. Inspection

Before the restoration process starts, it’s crucial to determine the extent of damage and what areas in the property require repairs. The professionals will utilize their moisture sensors and meters to figure out how far the damage goes and how much water has seeped into the property walls, ceilings, and flooring.

Upon inspection, they’ll determine if there’s a risk to the electricity wirings of the home or if the water has shorted out the supply. Switching off power sources will depend on the recorded damage.

During this phase, it’s crucial to discuss with a water damage restoration professional and learn what needs to be done to fix the water damage issues. In some cases, peeling off the materials in your house is imperative and it’s crucial to know beforehand who will tackle the repairs.

    2. Removal Of Standing Water

When there’s lingering water in your property, it requires immediate removal to prevent further damage. No other task will proceed unless water stays in the area. After the complete removal of the residual water in your home, the technicians can quickly pinpoint the source of the issue. Whether it’s a busted pipe or backed-up drain, their finding will help them deal with it right away.

    3. Preventing Further Damage To The Property

Dealing with the water damage should be carried out promptly. If the water is left to stand for a long time in the property premises, there’s a high chance that the damage will eventually worsen and can result in health issues and house structural problems.

During this phase, it might be best to require the services of a plumber to pinpoint and control any leakage. A contractor may also help to remove walls, flooring, and ceiling with evident signs of water damage. It’s crucial to remember that water damage can lead to the steady deterioration of certain structural materials. In no time, they’ll turn into potential hazards if they’re left unattended.

    4. Drying Phase

Once the standing water is completely removed and any materials that might pose a drying or structural hazard have undergone removal, the professionals will then start with the drying process. During this phase of water damage restoration, it involves placing different tools such as drying fans and a dehumidifier in the house.

In some cases, they’ll install plastic sheeting along with heaters to allow the water to evaporate more quickly. If the walls have sustained damage, it might be necessary to eliminate the baseboards or drill holes to promote rapid drying.

The technicians might lift away a section of the carpet to allow it and the padding to dry thoroughly. If there’s a delay in these measures, there’s a high chance for your home to develop an unpleasant odor and mold growth may occur. Additionally, structural damage is likely to progress due to the excessive moisture in the property.

    5. Progress Monitoring

During the entire process, the professionals will carefully monitor how well the drying process is going on. As part of the monitoring, they’ll utilize meters to test the moisture content in affected areas of the house and ensure that all equipment functions properly. Depending on the severity of the water damage, this phase can last up to several days.

When the meters show that the moisture level is equal to the figures of the previous dry state of the space, the technician will remove the fans and dehumidifiers from the area. At this phase, the water remediation process is considered complete.

    6. Sanitation And Cleaning

After the complete removal of the traces of water and everything is thoroughly dry, the technicians will perform the final cleaning that involves sanitizing the area to stamp out the possibility of bacterial growth. Sprays and other deodorizing products may also be introduced to eliminate any unwanted odors as a result of the water damage.

    7. Preventing Mold Growth

Depending on the type of water damage on your property, there’s a high chance for mold to develop later on. Making sure that your home is appropriately dry and sanitized should prevent this from taking place. However, in the case mold develops, repair technicians have the skills and expertise to take on damage control to eventually eliminate fungi and molds altogether from your house.

    8. Reconstruction

In the event that some of the elements in your home were torn away such as walls, ceilings, or flooring to give way for the water damage restoration and cleanup process, you need to repair or replace them.

Depending on the extent of the water damage in your home, the repair process might require removing large areas of affected floorings, ceilings, walls, and baseboards and replacing them with new ones. It would be ideal if you choose replacements that have waterproof capabilities to help mitigate future moisture problems.

The water damage restoration professionals might tackle these repairs or subcontract the task to various people experienced in handling this type of job. In some cases, they might also suggest contractors that you can get in touch with to have the deed done on your behalf.

Usual Equipment And Tools Used In The Water Damage Restoration Process

During water damage restoration, trained professionals will utilize various tools and equipment to meet their goal of helping you out with your concerns. In most cases, they often include detection devices, air moving equipment, generators, and deodorizing equipment. All have a specific purpose and can get your house dry and back to its pre-damaged state.

• 
  Detection devices such as moisture meters and sensors.

These devices allow technicians to determine how wet an area is so that they’ll know which step to take to remediate the situation. The sensors and meters display the level of moisture of the flooring, walls, ceilings, and other materials. With the data from these devices, the repair personnel can decide whether to dry them or tear them out.

• 
  Air moving equipment such as fans and dehumidifiers.

Thoroughly drying an area requires the removal of moisture from the affected materials and also from the air. Technicians will place fans that blow air throughout the surface to promote evaporation. Dehumidifiers help draw out moisture from the air and drain them to prevent settling back into the materials and damage the property further.

• 
  Deodorizing equipment such as air scrubbers, foggers, and thermal foggers.

An air scrubber works by eliminating unwanted particles, chemicals, and gases from the air. It soaks up air from the space and drives it through filters to eliminate the contaminants that contribute to the odor.

Meanwhile, a fogger works by transforming a chemical into a mist or fog that removes odors, kills bacteria, or discourages mold growth. Thermal foggers work by utilizing a solvent-based deodorizer that undergoes heating and transforms into a fog that clings to odor molecules and eliminating the smell.

The technicians also utilize generators in case water damage results in loss of power to the property. The generators will serve as a source of power for using the equipment and tools for the water damage restoration and cleanup process.

Conclusion

The water damage restoration and cleanup process follow a series of measures and steps to ensure that your property will be back in its former condition. Although the process your property will go through will vary depending on the type of sustained moisture damage, working with professionals will ensure the best results in no time.